12 best surface pumps

Surface pumps can be seen in many dachas today. This is not at all surprising - it is often the installation of such equipment that is the only way to deliver the right amount of water to the house without bothering yourself with unnecessary physical labor. Still, living in a private house or in the country, no one wants to carry water with buckets, as they did 100 years ago. Fortunately, the selection of pumps today is large enough for every potential buyer to easily choose an option that suits him completely. True, it is precisely because of the large assortment that difficulties often arise - which model to give preference to? To simplify the choice, we will make a rating of the best surface pumps, listing the most successful models, their advantages and disadvantages. This will allow each reader to acquire exactly the kind of equipment that will be the best choice for him.

How to choose a surface pump - recommendations and advice

In general, in order to choose a surface pump for water, you need to take into account quite a few nuances and subtleties. Let's talk about the main ones.

One of the most important indicators is suction depth... It shows what the maximum depth can be between the water level and the pump so that the latter works stably and without interruption.

Also, do not forget about performance - it directly depends on the power. The performance depends on how much water the pump can supply in a certain time.

Maximum head shows the permissible length of all pipes located between the pump and the end consumer (or rather, a boiler, storage tank or other container where water is stored).

Finally, we must not forget about safety... It is desirable that the pump has protective functions to protect it from overheating and failure. They significantly reduce the likelihood of having to go with the pump to a repair service a few weeks after purchase.

Surface pumps conventional - best models

In general, surface pumps are the most popular among summer residents. The fact is that they do not need to be lowered into a well or a well - it is enough to install them in the immediate vicinity of them. This means that the equipment is easy to install and dismantle. This is especially important for summer residents - it is possible to install a pump in the spring, and in the fall, when leaving summer housing, take it with you so that it does not become a prey for thieves. True, this has to be paid for with a higher noise level - it is not muffled by the thickness of the earth. However, according to most users, property safety is worth putting up with mild discomfort.

1. VORTEX PN-650

Looking for an inexpensive, easy to use and convenient well pump? This model will certainly not disappoint. It boasts a good suction depth - up to nine meters. For most regions of our country, this is quite enough. It's nice that the developed head reaches 45 meters - it is possible to install the pump at a great distance from the house, and it can easily deliver water without causing unnecessary problems. In addition, the remoteness further reduces the noise level, which, judging by the reviews, is already quite low. Finally, the throughput of the model is quite good - 3.6 cubic meters per hour of operation. Most summer residents do not need more.

Advantages:

• small dimensions;
• high power;
• durable cast iron body;
• high-quality assembly;
• combination of performance and price.

Disadvantages:

• workmanship of the check valve.

2. JILEX Jumbo 70/50 P

Here is one of the most powerful surface pumps among those for which you do not have to pay a huge amount. It will be a good choice for users who need to deliver water over a long distance, for example, if the house is far from a well. After all, this model has a maximum head of as much as 50 meters. And the suction depth is quite high up to 10 meters.

When choosing a model, it is advisable to choose a capacity 10-20% higher than the required one in order to compensate for the increased demand for some reason, and not to buy a new pump.

Thanks to the power of 1100 W, the model is able to pass up to 4.2 cubic meters of water through itself per hour - a very good result. An additional plus is the high-quality assembly - not surprisingly, almost all the reviews left on this model are positive.

Advantages:

• affordable cost;
• high power;
• economical power consumption;
• high-quality performance;
• easy to maintain.

Disadvantages:

• significant noise level.

3. Marina CAM 80 / PA

Looking for a surface pump that suits you in terms of price and quality? Take a closer look at this. Its productivity reaches 3.6 cubic meters per hour of operation, which can be called a pretty good indicator. At the same time, the unit is quite compact and light - the weight is only 7.2 kg, so there will be no unnecessary problems during installation and transportation. The maximum head is 42 m, and this will probably be enough for most users. Finally, the suction depth reaches 8 meters, so there will be no problems with water lifting. So, if you need to choose a surface pump for a well, then you will definitely not regret buying this model.

Advantages:

• good maximum head;
• light weight;
• long service life;
• the presence of a handle for transportation;
• affordable price.

Disadvantages:

• some models do not have very high build quality.

Surface Circulating Pumps - Best Models

Surface pumps are used not only to lift water from a well or drain a dirty water tank. Circulating ones are no less popular. Most often they are built into heating systems, which can significantly increase the speed of water propagation and, accordingly, speed up the process of heating the premises. This reduces the inertia of the heating system and often makes it possible to save a lot of money by reducing the amount of fuel burned. Therefore, it will be very useful to talk about the most successful of them.

1. Grundfos UPS 25-40 180

A very good surface circulation pump that can be a good choice for many buyers. Its weight is only 2.5 kg, making transport and installation much easier. Suitable for pipes with a diameter of one and a half inches, which are often used in heating systems. The throughput is very good - as much as 4 cubic meters per hour. The maximum head is not too high - only 4 meters. However, this will not cause problems - a higher indicator is generally not needed, unless we are talking about a two- or three-story mansion with high ceilings. The pump is suitable for clean water, both low temperature and high - in the range from +2 to +110 degrees Celsius.

Advantages:

• light weight;
• long service life;
• low noise level;
• profitability;
• good performance;
• small dimensions.

2. VORTEX TsN-25-4

This is an inexpensive, compact, but at the same time reliable and high-quality circulation pump, which will significantly improve the heating system in your country house or summer cottage. It is suitable for small houses - maximum two-storey ones, since the maximum head is 4 meters. For an hour of operation, the pump passes up to three cubic meters of water - for such a compact model this is a good result.

The model uses a "wet" rotor made of high quality, rust resistant materials, which increases the efficiency of the operation.

It can work with water temperatures up to +110 degrees. And even if something happens and the heating system freezes, lowering the temperature to -10 degrees Celsius will not harm the device. Unsurprisingly, it is ranked among the best surface pumps. With all this, its weight is 3 kg, which can be called an additional plus. Has a one and a half inch diameter threaded outlet.

Advantages:

• high quality, reliable materials;
• low noise level;
• small size;
• affordable cost.

Disadvantages:

• not all models can boast of a high-quality assembly.

3. Grundfos UPS 25-60 180

Are you looking for an inexpensive surface pump for a summer cottage or country house with high ceilings? Surely this one will suit you. After all, this model can raise water to a height of six meters! And its performance is very good - 4.35 cubic meters per hour. Works well with liquids in a wide temperature range - + 2 ... + 110 degrees. A "wet" rotor provides not only good performance, but also a higher level of reliability due to the simplest design. It is nice that this circulation pump has a very low weight - only 2.6 kg.

Advantages:

• works almost silently;
• affordable price;
• practical and reliable;
• compactness;
• significant maximum head.

Disadvantages:

• some models vibrate strongly during operation.

Surface pumps for sewage - the best models

Temporarily or permanently living in a private country house, most people are still not going to give up the benefits of civilization in the form of a warm toilet. However, in order to be able to do this, the waste reservoir must be regularly cleaned - otherwise it will overflow rather quickly. This is where special surface sewage pumps come to the rescue. They can work not only with clean water, but also with a liquid that has a large amount of impurities - including drainage, sewage and waste water. Let's talk about some of the most successful models.

1. SFA SANITOP

A very successful model of a surface pump for sewage. One of the advantages is good performance - as much as 6.6 cubic meters per hour. This makes it easy and quick to handle large volumes of dirty water. It's nice that the maximum head is quite large - five meters. This allows waste to be removed both from the home and from deep drainage pits. Two water intake points can be connected to one pump, which is very convenient and practical. An additional plus is the high level of security. After all, the model is equipped with an idle protection function, which means that it will not fail due to wasted work. This is facilitated by the float control of the water level - simple but reliable. Many users like that the setup is quite quiet - only 46 dB. So this surface-mounted dirty water pump will definitely not disappoint.

Advantages:

• high throughput;
• low noise level during operation;
• high build quality and materials;
• two connection points;
• easy to operate;

Disadvantages:

• high price.

2. Grundfos Sololift 2 WC-1

Looking for a surface-mounted faecal pump that delivers high performance? Pay attention to this one. It is distinguished by its high productivity - almost 8.94 cubic meters per hour. With a maximum head of 8.5 meters, the pump can operate both above ground and below ground level.

Some models of sewage pumps are equipped with a cutting attachment that allows them to handle large blockages.

A 10-liter hydraulic tank increases ease of use, and a special cutting attachment ensures no blockage problems. It's nice that, despite the excellent characteristics, the pump weighs very little - only 7.3 kg.

Advantages:

• high-quality assembly;
• good cutting attachment;
• copes well with the tasks;
• excellent design.

Disadvantages:

• serious noise during operation.

3. SFA SANIVITE

It may not be the best surface water pump for dirty water, but it certainly is one of them. One of the advantages is the low noise level during operation - 42 dB, which can be called a very good result. It can pump up to six tons of liquid with impurities per hour, and this is probably enough even for a large family and an extensive farm. It is important that one pump has up to three water intake points - this is very important, as it allows you to connect to it, for example, a bath, toilet and sink, without spending extra money on the purchase of several devices. It's nice that the pump works with hot water - up to +60 degrees, which not all analogues can boast of.

Advantages:

• good performance;
• three water intake points;
• silent work;
• ease of installation.

Disadvantages:

• due to the lack of a filter, an unpleasant smell arises with a long space

Surface pumping stations - the best models

To completely solve the issue of water supply in a private house, it is better to use not a simple pump, but a pumping station. It is more functional and is often equipped with a storage tank - its volume can vary significantly. The check valve prevents water from flowing into the well or borehole after shutdown, which reduces the amount of idle operation. Yes, the cost of such equipment is higher than that of standard pumps. But it is much easier and more comfortable to use them, which is appreciated by many owners.

1. VORTEX ASV-370/2 CH

A simple but high-quality surface pumping station with a relatively low capacity - 2.7 cubic meters. in hour. For a small family, this is enough, but for a household or a large group of people, you will have to look for a more powerful analogue. With a maximum head of 30 meters, it can deliver water to the house from a well located at a great distance. A plus can be called the nine-meter suction depth. Equipped with a small hydraulic tank - only two liters. In general, the station is designed to work with clean water, but the content is not more than 150 grams of sand per cubic meter. water won't be a problem. Works with a fairly large temperature range - from +1 to +50 degrees Celsius.

Advantages:

• small dimensions;
• low price;
• powerful pressure;
• maintainability.

Disadvantages:

• very small hydraulic tank.

2. JILEX Jumbo 50/28 H-18

A very good surface pumping station for summer cottages and houses. Has a good throughput - up to 3 cubic meters per hour. water. The maximum head of 28 meters makes it possible to deliver water to the house from a remote well. And the suction depth of nine meters is quite enough for most regions of our country. The model is equipped with a fairly large hydraulic tank of 18 liters, which makes it possible to start the pump less often, which means to increase the service life.

The built-in hydraulic tank allows you to have a certain amount of water at hand so that you do not turn on the pump every time you need to wash your hands.

The weight is quite large - about 15 kg, but for pumping stations this figure is rather modest. In general, the pump is designed to work with clean water, but a special filter efficiently retains particles up to 0.8 mm in size.

Advantages:

• good power;
• capacious hydraulic tank;
• quality materials and assembly;
• easy to purchase spare parts;
• small size.

Disadvantages:

• makes a lot of noise during operation.

3. Grundfos MQ 3-35

Easy to use and reliable model. The risk of failure is almost completely eliminated by the overheating and dry running protection function. Electronics monitors the water level, which is an added benefit. A throughput capacity of three cubic meters per hour is enough for most small farms, not to mention summer cottages. The maximum head of 35 meters solves the problem of the distance of the well or well. The pressure boost function is another big plus.

Advantages:

• high-quality assembly;
• low noise level;
• high degree of reliability;
• small size and weight;
• the possibility of increasing pressure.

Disadvantages:

• there is no hydraulic tank.

Which surface pump is better to choose

This concludes our roundup of the best surface pumps. In it, we tried to study the advantages and disadvantages of models from different categories, which will surely allow each reader to choose the option that will completely solve all his problems.