10 best welding masks

Welding work is an extremely important and crucial stage in the construction of various buildings and the installation of communications. Specialists have to work with welding equipment, so choosing the right mask for the welder is a very important condition for ensuring safety. But how to choose if modern stores offer dozens of models from different manufacturers, differing in cost, weight and a number of other parameters? In such a case, our experts have collected the best welding helmets in one rating, after studying which, each reader will be able to decide which model is the best choice for him.

Best inexpensive welding helmets

One of the main selection criteria when purchasing protective equipment for most users is cost. Indeed, it is foolish to pay thousands of rubles for a mask that will be used extremely rarely and for a short period of time. Therefore, people who are not professional welders usually buy cheap models. However, even in this case, the mask must provide high-quality eye protection, because even a rare exposure to the welding arc on the eyes can dramatically impair vision. So, it is advisable to buy products only from serious companies that value their reputation. Fortunately, today in the lines of many manufacturers you can find an inexpensive mask that protects the eyes and face well.

1. ELITECH MC 500-1

A relatively inexpensive mask, distinguished not only by a very unusual design, but also by high quality. The original coloring distinguishes it from a number of the same type of gray and black models, so it will be problematic to confuse them. Works great both from the solar battery and from two AA batteries, which can be easily and quickly changed without wasting time. The available charge indicator allows you to monitor the condition of the batteries in order to replace them with new ones in time. It's nice that the mask weighs 470 g - experienced welders know very well that every extra hundred grams leads to the early occurrence of fatigue and pain in the neck.

Advantages:

• light weight;
• the light filter works quickly;
• an excellent choice for home use;
• original design.

Disadvantages:

• not suitable for operation at temperatures below -5 degrees Celsius.

2. RESANTA MS-1

Another good mask at an affordable price. One of the main advantages is the very high response speed of the filter - only 1 ms. Therefore, nothing threatens the eyes and face - the filter efficiently cuts off both ultraviolet and infrared radiation.

The response time of light filters for most modern masks ranges from ten thousandths to hundredths of a second. Therefore, a sudden flash of welding has no effect on the eyes.

On the street, in cloudless weather, it works great from a solar battery, and the rest of the time - from a regular battery. The shade level is easily adjustable, which is especially important for professional welders who want to be able to customize the equipment for themselves. Unsurprisingly, judging by user reviews, most of them don't regret making this purchase.

Advantages:

• adjustment of the speed of the light filter;
• durable plastic;
• grinding mode is supported;
• ease.

Disadvantages:

• some models have uneven shading.

3. CALIBER MCX-11

Users looking for a mask that reliably protects against the welding arc as well as hot metal spatter will love this chameleon. In addition to a high level of safety, it also features a high speed of response of the light filter and the ability to adjust it. Moreover, the adjustment is very simple and convenient, which makes the mask a good purchase for both experienced welders and beginners. A nice addition is the rather large window, which makes the work easier. Together with the affordable price, this makes the mask a viable candidate for our review.

Advantages:

• low cost;
• high level of protection;
• low cost;
• operating temperature range (from -10 to +60 degrees);
• flexible settings.

Disadvantages:

• flimsy mount;
• defective models often come across;
• not the best quality plastic.

4. Wester WH5

Another inexpensive, but popular model that perfectly protects against IR and UV radiation, as well as liquid metal splashes. The mask weighs surprisingly little - only 440 grams, which is one of the best indicators among analogues in the rating. The viewing window is not too large - 42x92 mm, which may slightly reduce the attractiveness, but in general, this is quite enough for comfortable work.

When choosing a mask, it is important to pay attention to whether the batteries are easily changed - some models have serious problems with this.

Fast response and flexible dimming can also be attributed to the model. So, at a low price, the mask is ideal for all types of welding.

Advantages:

• low cost;
• great option for garage and household needs;
• high level of protection;
• light weight.

5. SPECIAL WM-300

This mask is an automatic chameleon with a filter response speed of 0.2 ms. By today's standards, this is a fairly low speed, but the cost is fully consistent. If you don't have to work with welding often, then it is quite possible to purchase this model. Of course, it runs on solar and conventional batteries, so when working outdoors during the day, you don't have to worry about the charge. A very important advantage for many users is that the mask is made of impact-resistant material - there is always a risk of dropping and damaging the equipment at a construction site. Dimming can be turned on and off, which many users like.

Advantages:

• affordable price;
• made of durable materials;
• ease of use;
• sits comfortably on the head.

Disadvantages:

• dimming does not always work quickly at dusk.

The best professional welding helmets

Professionals have different requirements for protective equipment than amateurs and beginners. They are willing to spend large sums to get a really high-quality mask that guarantees complete protection for the eyes and face. They also often need additional features, which can dramatically increase the cost of masks. However, not a single reasonable person will work regularly and a lot with welding and save on eye protection. Therefore, in the review, you should definitely consider several such models.

1. Fubag Ultima 5-13 Panoramic Black

The TOP 5 is opened by the best professional mask, which is made of high-strength material and has 4 optical sensors, which increases the accuracy of responses. Everything is perfectly balanced in it. Start with at least a fairly large viewing window - as much as 100x67 mm, which provides maximum comfort when working. The headband is very comfortable, carefully designed - thanks to it, the already light weight of the mask is distributed evenly, and does not cause difficulties even during prolonged work.True, not all users like that the blackness range of the viewing window is changed by a slider located inside the mask - many craftsmen prefer to be able to adjust this indicator without removing the protection.

Advantages:

• large viewing window;
• reliable fastening;
• excellent equipment;
• fits well on the head;
• shockproof material.

Disadvantages:

• internal dimming adjustment.

2. Aurora Sun-9 Max Expert

Users who do not know which masks are better suited for performing different types of work, that is, protecting not only from UV and IR radiation, but also from mechanical damage, should pay attention to this model. The minimum shading when the power is off is only 3 DIN, which makes the mask perfect for both welding and work, for example, with a grinder - it will not be too dark. At the same time, the shading is easily adjusted to 13 DIN - more and not needed by any welder.

This mask can be used in conjunction with a respirator and construction helmet, which makes the model more versatile.
The device receives power from a lithium battery, the charge of which is easily checked - you just need to press a special button that lights up the indicator.

Advantages:

• flexible settings;
• build quality and materials;
• high optical class;
• very large observation window;
• high speed of response.

3. ESAB Warrior Tech

A very successful chameleon with manual adjustment, which, despite its high cost, can pleasantly surprise even a discerning user. It is unusual and very convenient that the adjustment sensors are located both outside and inside. This allows each owner to customize the mask to their liking. High response speed combined with a high level of protection against mechanical damage make this model a good purchase for people who work with welding a lot and often. It is important that you can work with it at temperatures up to -10 degrees. A high-quality layout is complemented by the ability to install dioptric lenses.

Advantages:

• duplicated tuning sensors;
• increased viewing angle;
• low latency;
• excellent protection;
• you can install diopter lenses.

Disadvantages:

• quite high cost.

4. Fubag Blitz 9-13 Visor

Perhaps this is the best welding mask in combination with price and quality. Yes, the price is quite high. But a quality item cannot be cheap. But the mask is very comfortable - the ergonomics are worked out conscientiously. In addition, there is protection not only against metal splashes, but also against fogging. How many analogs can boast of this?

When choosing a mask, find out if the batteries can be changed - in some models (most often inexpensive ones) they are simply soldered into the case.

The material is shock-resistant, so it will last more than one year, even to the most tidy owner. The brilliant light filter responds surprisingly quickly and is easily customizable to the needs of the individual user.

Advantages:

• anti-fogging;
• elegant ergonomics;
• ease of maintenance;
• strength and reliability.

Disadvantages:

• the price frankly bites.

5. Aurora SUN-7

The mask looks frankly futuristic - the developers have creatively approached the design development process. The functionality will pleasantly surprise even the most picky owner. There is a self-test option, a grinding mode, and you can also install a protective glass or a diopter lens. The settings are very flexible, and mainly the levers are located outside - inside there is only a button for checking the battery charge and a lever for adjusting the delay time. A good view is provided by a 55x99 mm window.

Advantages:

• grinding mode;
• large window;
• comfortable felon;
• self-test function;
• the ability to install diopter or protective glass.

Disadvantages:

• there is no smooth adjustment of the delay - only three modes.

How to choose the right welding helmet

In order not to regret a poorly chosen welding helmet, there are many factors to consider. But the most important are:

1. The speed of the filter, the lower the value, the better.
2. Adjustment location - most users find it more convenient than the model with the levers outside.
3. Power type - battery, solar or combined.
4. Weight - the less it is, the better, the main thing is not to damage strength.

This concludes our TOP 10 best masks for welders. In it, experienced experts listed the most successful models, relying on both the parameters declared by manufacturers and the reviews of ordinary users to ensure maximum objectivity.