12 best tile cutters

Currently, tile is one of the most popular materials for interior decoration. Due to its technical characteristics, it can be used with equal success both for interior furnishings indoors and for facing the facade of a building. In order for the work carried out to be of high quality, they must be carried out by experienced craftsmen who have the best tile cutters and other tools for working with tiles in stock. It is extremely rare to combine the area of ​​the room with the dimensions of the tiles. Usually it is necessary to adjust the configuration of the ceramic products to the line of joints between walls and ceiling or floor. This can only be done with a quality tile cutter.

How to choose a tile cutter

Choosing a tile cutter is necessary based on how intensively it will be used. For example, any mechanical tile cutter is fine for DIY homework. When choosing it, you need to pay attention to the following characteristics:

• the maximum dimensions of the tiles to be cut;
• machine dimensions;
• built-in squares;
• circular cutters;
• absence of external defects and defects;
• mechanisms for fixing tiles.

For cutting ceramic tiles intended for masonry on the wall, a device with a minimum frame size of 400x180 mm is sufficient.

When choosing more professional equipment, characteristics such as are more important:

1. cutting accuracy;
2. maximum permissible tile thickness;
3. cutting performance and speed;
4. the ability to work with different materials;
5. convenience and comfort of use;
6. availability of a diamond disc and spare parts;
7. engine power;
8. the ability to cut at an angle.

Accordingly, the choice of a quality tile cutter is a fairly important component of quality work. With the current variety of these types of tools, this is not so easy to do, but this review can make this process easier.

The best manual tile cutters

This type of tile cutter is one of the most popular for home use. They are lightweight, easy to use, do not require an electrical network and take up little space. They are very easy and convenient to carry, which allows them to be used in almost any situation and place of work. However, manual tile cutters have certain limitations:

1. small amount of work;
2. the thickness of the tiles to be cut should not exceed 16 mm;
3. the use of exclusively ceramic material.

The device of manual tile cutters is as simple and straightforward as possible. They consist of a body, a pair of guides for more precise cutting of the material and a carriage with a presser foot. The cutting process is carried out with a diamond cutter or roller. First, an incision is made with a depth of 1 to 2 mm, after which, using a lever, a break is made along the required line. In this case, there is no need to grind and grind the tiles.

By design, they are divided into:

• mechanical;
• roller;
• bearing.

To choose an inexpensive but good mechanical tile cutter, you also need to pay attention to features such as:

1. the presence of a cutting wheel for round holes;
2. structural strength and reliability;
3. the presence of a ruler for high cutting accuracy;
4. the presence of a broach for sawing large workpieces.

1. BOSCH PTC 470

This device is the best manual tile cutter according to customer reviews. It can be used to cut and break tiles in one step, without excessive effort. It is equipped with a titanium-coated, wear-resistant cutting disc for comfortable cutting of ceramic products.

At the same time, this tool allows even cutting narrow strips of ceramic with high precision. It also features an angle stop for precise diagonal cutting of tiles at 45 degrees.

This tool is designed to work with ceramics up to 12 mm thick.

Among the advantages are:

• comfortable handles;
• long service life;
• light weight;
• durable cutting element;
• secure fixation of tiles.

The disadvantages include:

• material limitation by maximum thickness up to 12 mm.

2. RUBI Speed-62 N

If you need to purchase a reliable mechanical tile cutter, then this model is the best fit. This device is a versatile tool that can be used to cut porcelain and glazed ceramics. The high power of the separator and the reinforced structure provide convenience and high efficiency of operation. The chrome-plated coating provides resistance to corrosion and increases the service life.

The advantages of this model include:

• cutting depth range from 5 to 15 mm;
• the maximum size of ceramic products is 440x440 mm;
• aluminum base.

The lack of "ballerina" can be considered a disadvantage.

3. MTX 87688

This mechanical tile cutter has a fairly low cost, but this does not mean that this tool is bad. In fact, he copes with his duties quite well. So, he is able to cut tiles of a sufficiently large size. Due to the special coating of the rail, reliable adhesion of the rail and the ball mechanism is ensured.

Attention! This model is a product of a Chinese company, so it is not recommended for those who do not trust the quality of goods from China.

Advantages:

• frame made of aluminum alloy;
• easy handle stroke;
• no backlash between the rail and the carriage;
• long service life;
• low cost;
• maximum cutting length 600 mm;
• the maximum thickness of the cut product is 16 mm.

Disadvantages:

• during operation, the sole bends, you need to strengthen;
• specific cutting roller.

4. Kolner KTC 600

This tile cutter can be used for tiling, and can easily and quickly cut ceramic tiles, tiles and porcelain stoneware. A high-precision marking ruler helps to do this as efficiently as possible, allowing the master not to waste time on preliminary marking of workpieces. Soft pads prevent the tiles from slipping during the cutting process, keeping them firmly in place.

Kolner KTC 600 is recommended for use during home renovations where the amount of work is not too large.

Advantages:

• good cutting quality;
• less effort is needed to cut;
• the ability to cut tiles, ceramics and porcelain stoneware;
• maximum cutting depth 16 mm.

Disadvantages:

• not suitable for professional activities.

5. STAYER Standard 3303-40

This tool is the most inexpensive in the ranking of manual tile cutters. Therefore, it would not be very rational to use it in professional activities. It will not cope with high loads in the best way, but buying a tile cutter for home repairs and as a tool, just in case, will be quite a good solution.

Advantages:

• smooth and precise movement of the cutting tool;
• cutting length 400 mm;
• the presence of a rubber coating that prevents slipping;
• high-quality guides;
• metal base.

Disadvantages:

• characteristics insufficient for a professional instrument.

Best electric tile cutters

It becomes quite problematic to cut ceramic tiles, the thickness of which exceeds 15 mm, with the help of mechanical tools, because it is necessary to apply much more force than the pressure of the hand allows. Therefore, for these purposes, electric tile cutters are used, which outwardly look like a circular saw. They consist of a work table and a cutting tool itself.

Such devices allow you to make both straight cuts and at an angle of 45 degrees. Since the tile is cut through and through, there are no defects such as chips and others typical for hand-held power tools. Electric tile cutters are divided into two types: top-drive or bottom-drive. The first type is more popular due to its greater functionality.

With the help of such equipment, you can cut not only tiles, but also more serious materials, for example:

• natural and artificial stone;
• concrete;
• glass;
• granite.

1. Makita 4101RH

This device represents one of the best electric tile cutters in terms of reliability. Its characteristics allow it to be in the leading positions in the TOP 10. The maximum cutting depth of 35 mm allows it to be used when cutting almost any finishing material.

Recommended for professional use requiring good performance and tool reliability.

Advantages:

• the presence of a circuit breaker;
• admissible diameter of a diamond disc 110-125 mm;
• the presence of water cooling;
• well-developed cooling system;
• power 860 W;
• rotation speed 13800 rpm.

The disadvantage is the relatively high cost, which is justified by the fact that one of the best electric tile cutters is purchased for this price.

2. Messer M125

This device is designed for cutting stone products and surfaces. In terms of quality, the tile cutter is in the leading positions. Maximum productivity and long service life are ensured by the water supply system, which cools the work area, allowing you to work long enough without the risk of ruining the diamond blade. For safety reasons, it is equipped with an electric shock protection system. This machine is the best electric tile cutter with mains operation.

Among the advantages are:

• powerful 1200 W motor;
• the presence of an additional casing on the disk;
• the ability to install a concave disc for shaped cutting;
• comfortable handles;
• decent equipment.

The only disadvantage is that the cost, which is not available to everyone.

3. DIAM ML-180/700

This tile cutter is one of the best price-performance combinations. With its help, you can quickly, efficiently and efficiently cut the tiles. It can be used for cutting ceramics and porcelain stoneware. Different disc options can be fitted depending on the material. This good mains powered electric tile cutter is relatively compact, has high efficiency and low noise.

Other advantages of the device include:

• no restrictions on the length of the cut;
• the ability to cut at an angle of 45 degrees;
• disc diameter 180 mm;
• you can chamfer;
• table with high-quality galvanized coating;
• maximum cutting depth 34 mm.

The disadvantage is a non-removable bath.

Best water-cooled tile cutters

Tile cutters equipped with water cooling differ from others in their high efficiency and extended service life. Water supply from the reservoir is carried out simultaneously with the inclusion of the cutting element. Thus, it is possible to achieve a solution to two tasks at once: to prevent overheating of the diamond disc and to reduce the amount of dust in the surrounding space during the processing of tiles.

There are two types of these tools: hand-held and professional.It is best to work with handheld only in a horizontal plane to avoid increased dust formation. If more complex work is required, then it is difficult to do without professional equipment.

Some of the benefits of using water-cooled tile cutters include:

1. significant increase in the service life of the diamond blade;
2. the ability to cut harder materials such as glass, natural or artificial stone, and others;
3. the ability to carry out large volumes of work without wasting time cooling the cutting element;
4. increasing the efficiency of work, regardless of their duration.

1. DeWALT DWC410

This excellent water-cooled electric tile cutter is designed for cutting marble, granite, paving slabs, artificial stone, glass and ceramics. It can be used to cut at an angle of 45 degrees. Thanks to the use of water cooling, the cutting blade does not overheat. It also contributes to a significant reduction in dust formation.

Other benefits include:

• powerful 1300 W motor;
• long service life;
• comfort in use;
• maximum cutting depth 34 mm;
• the ability to adjust the cutting angle up to 45 degrees;
• cutting depth adjustment.

Disadvantages:

• high noise level.

2. ELITECH PE 800 / 62P

According to user reviews, this tile cutter is an excellent choice for both professional and home use. For easier movement, the device is equipped with a pair of roller wheels. The built-in disk cooling system provides high performance and greater reliability. ELITECH PE 800 / 62P can be used to cut all types of tiles, including porcelain stoneware. The presence of a protective shutdown increases safety in the event of an unexpected breakdown.

Advantages:

• high performance;
• cut length limiter;
• high precision guide;
• protection of cable and water system;
• the possibility of desktop and floor installation.

Disadvantages:

• large weight (up to 40 kg).

3. Makita CC301DZ

This diamond saw is equipped with a special water tank with a large mouth for wet cutting. The ergonomic and lightweight design allows you to work much longer without fatigue. This is facilitated by a special sole, with which you can guide the tool along the working surface. The main feature of this device is the ability to operate on battery power, which will come in handy in places where there is no access to the electrical network. In fact, it is one of the best cordless tile cutters on the market.

Other advantages:

• availability of a reliable protective casing;
• endurance to stress;
• nickel plated base;
• the ability to work with lithium-ion batteries;
• rubberized handle.

Disadvantages:

• not always correct water supply;
• no battery included.

4. CALIBER PLE-200/1000

This tile cutter is well suited for those looking to purchase quality equipment at an affordable price. It works well with stone and ceramics. With its powerful 1000 W motor and 200 mm diameter cutting disc, it can cut almost any type of veneer. Disc cooling water collects in the sump, keeping the work area clean.

Other benefits:

• ease of use;
• collection of water and dust;
• a combination of cost and opportunity;
• relatively light weight.

Disadvantages:

• not suitable for professional work.

Which tile cutter to buy

The choice of a tile cutter must be done very carefully. In this case, the main factor is the scope of its application, the intensity of use. To carry out repairs at home, it will be enough to purchase an inexpensive manual tile cutter.If you plan to make a living with it, doing large volumes of work, then a professional tile cutter is already needed, capable of providing the necessary performance and serving long enough for its purchase to be a justified investment. Therefore, in the question of which unit is better to buy, it is necessary to be guided by the expediency and reviews of other users.